Product Center

Sanyou has been deeply engaged in relay industry for 13 years.

SY200-series

产品概述

Features:

● Capable of withstanding short-circuit current of 5000A

● Non-position-sensitive -can be installed anywhereand is easy to install

● Meet the requirements for responding to abnormal working conditions and be capable of switching to 10-times overcurrent.

● There are loads of 12V and 24V, and models with auxiliary switches are optional.

● Can be used in 12V and 24V battery pack start-stop systems

● This product is a latching relay. After power failure, the coil does not need to be continuously energized, making it more energy-efficient.

产品优势

详细参数

Contact arrangement
Standard form :1Form A
Auxiliary switch type:1Form A,1FormB
Contact material AgSnO2
Contact Resistance
Main contact:≤0.30mΩ(@10A)
Auxiliarycontact:≤200mΩ(@ 1A)
Rated load current
Main contact:250A
Auxiliarycontact:1A
Max.Contact Voltage
14VDC(Load 12Vspecification)
28VDC(Load 24vspecification)
Operate Time (at nominal volt.) ≤15ms
Reset time ( at nominal volt.) ≤10ms
Insulation resistance 100MΩ(500VDC)
Initial dielectric strength (Leakage currents 1mA) Between open contacts 1000VAC,50/60Hz ,1min
Between contact and coil 1000VAC,50/60Hz ,1 min
Between the main contact and the auxiliary contact 1000VAC,50/60Hz ,1 min
Between the coil and the auxiliary contact 1000VAC,50/60Hz ,1 min
Material compliance EU ROHS/ELV, China RoHS, REACH
Temperature rise <70K,@250A,85℃C(copper bar cross-section 35mm2)
Shock resistance Functional 50G
Destructive 100G
Protection level IP64
Ambient temperature -40℃℃ to +85°℃
Humidity 5% to 85%RH
Terminal Configuration
Terminal:M6 through hole
coil :connector
 Weight
110g±5g

相关下载